masonry
Concrete
Cast concrete and cementitious surfaces.
Check this surface →← All joint guidesChecked 01 Sept 2026 Checked 18 Jul 2026
Two-surface guide
Concrete with Brick
The products below list both surfaces in manufacturer information. That narrows the field; exposure, movement, coatings and joint shape still decide whether one fits your exact job.
Concrete
Brick
masonry
Brick
Fired clay brick and similar porous masonry.
Check this surface →Products listing both sides
Compare wording, then check the limits.
No product is ranked by retailer or commission. Open its guide to read all available preparation and use details.
KINGDELI
KINGDELI Clear Silicone Sealant Waterproof
neutral siliconeBrick“It adheres to glass, aluminum, ACP, ceramic, brick, concrete, PVC, ABS, metal, and other common building materials without primer in most cases”
Concrete“It adheres to glass, aluminum, ACP, ceramic, brick, concrete, PVC, ABS, metal, and other common building materials without primer in most cases”
- Environment
- The low-odor, low-VOC formula makes it suitable for indoor applications where comfort matters
- Primer guidance
- It adheres to glass, aluminum, ACP, ceramic, brick, concrete, PVC, ABS, metal, and other common building materials without primer in most cases
- Water exposure
- Formulated to provide excellent waterproofing, this clear silicone sealant prevents leaks and resists mold, mildew and weathering. Ideal for wet areas such as showers and sinks, it keeps joints watertight for years
SIKA IRELAND LIMITED
Sikaflex®-11 FC Purform®
Sika® Purform® polyurethane with a monomeric diisocyanate content of less than 0.1 % by weightBrick“An adhesive to bond construction components and materials such as: Masonry”
Concrete“An adhesive to bond construction components and materials such as: Concrete”
- Application temperature
- Ambient Air Temperature +5 °C min. / +40 °C max.
- Application temperature
- Substrate Temperature +5 °C min. / +40 °C max.
- Joint size
- The joint width must be ≥ 10 mm and ≤ 35 mm.
- Joint size
- A width to depth ratio of 1:0.5 for facade joints